This scanner is quite simple to use and to connect to an iOS (Apple) or Android phone.
If you have a problem when scanning and it isn't working as it should, below you'll find some barcodes to scan in the order shown, and it will work normally.
To reset to factory settings, scan the barcode below.
Then scan the barcodes below in order.
For the scanner to work as a keyboard, scan the two barcodes below.
To save battery, you can set the scanner to switch off after X minutes of inactivity by first scanning the barcode below: (default is 30 minutes)
Then scan the barcode that suits you. (click for a larger image)
To switch the scanner off immediately, scan the barcode below.
If, when scanning, the scanner doesn't press "enter" after "typing" the barcode, so ScanMore doesn't go on to check it, scan the barcode below.
If you want to use the scanner with another phone/tablet, simply scan only the barcode below and nothing else, as all previous settings are saved.
Once you do, the scanner automatically enters pairing mode and can connect to any device.








